High Power Aluminum Waterproof IP66 Outdoor 60w 90w 120w Led Street Ligh

GOOD QUALITY MATERIALUse high-quality die-casting aluminum--ADC12. Provide quality assurance for the les street light housing. Use 4/5mm tempered glass to make the protection level of the fixture to reach IKO9 Class. HIGH EFFICIENCY We can use high efficiency LED 3030/5050 chips, at least its lumen can up to 130lm/w. LIGHT CONTROLThe street light can fix with light control, automatic regulation of light (lighting on at dusk, off and start charging at dawn) IP66 WATERPROOFThe street lights with IP66 for waterproof and lightning proof, enabling it to withstand a variety of outdoor environments and weather conditions. Operating temperature: -35℃-50℃. COMPLETE WATTAGEThe street lights have four size, which is available from 60W to 400W. Can meet various project requirements. Ideal for lighting areas, parking lots, buildings and also for general outdoor lighting. Adjustable spigot0/90°

Products Details

products
products
products
products

Product Code

BTLED-1804

Material

Diecasting aluminum

Wattage

A: 150W-240W B: 100W-150W C: 40W-90W D: 20W-60W

LED chip brand

LUMILEDS/CREE/Bridgelux

Driver Brand

MWPHILIPSINVENTRONICSMOSO

Power Factor

0.95

Voltage Range

90V-305V

Surge Protection

10KV/20KV

Working temprature

-40~60℃

IP rating

IP66

IK rating

≥IK08

Insulation Class

Class I / II

CCT

3000-6500K

Lifetime

50000 hours

Photocell base

with

Installation Spigot

60/50mm

Housing: The housing is constructed out of high strength, lightweight bulk molding compound for long weathering and durability. UV stabilized polymeric door with handle pocket for toolless entry. Comes standard with Utility Label per ANSI C136.15 and 7-pin NEMA® Photocell Receptacle per ANSI C136.41 Wiring: Straight in wiring to terminal block for power input (#6-#14 AWG) Optic Box: IP66 rated optic box and driver enclosure inside optic box Luminaire: Luminaire secured with two mounting bolts Mounting: Mounts on 1.25 inch IP, 1.66 inch O.D. or 2 inch IP, 2.375 inch O.D. horizontal tenon (minimum 8 inches in length) and is adjustable +/- 5˚ in 2.5˚increments to allow for fixture leveling (two axis T-level included) Weight: 8.45 lbs.cULus: Listed suitable for wet locations ANSI: Certified to ANSI C136.31-2001, 3G bridge and overpass vibration standards CALTrans: Meets CALTrans 611 vibration testing IEEE/ANSI: 10 kilovolt surge suppression protection tested in accordance with IEEE/ANSI C62.41.2 FCC: Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions RoHS: RoHS compliant. Consult factory for additional details IDA: Dark sky friendly, IDA Approved when ordered with 30K

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours